| |
| Model Number |
| VF-700 |
| Machine |
| High Performance Milling High Speed Cutting |
|
|
 |
| ISOLATED DIRECT DRIVE SYSTEM : |
- Automatic spindle cooling system effectively dissipates heat generated from long runtime through efficient water cooled circulation.
- Reliable helical disc spring used to assure optimal spindle balance.
- Perpetual Pre-load Design reduces the effect of spindle thermal growth under long spindle runtime.
|
| FEATURES: |
- Optimal Machine Structure
|
| |
Specially designed T shaped machine structure features superior rigidity.The width of column is the same as the base.The table is independently installed on base,and fully supported through the entire stroke,assuring maximum accuracy and dependability.Long term accuracy at high speed machining is assured. |
|
|
| |
All castings are stress relieved for long term accuracy and long service life. |
|
|
| |
Roller type linear guideways on three axes feature higher feedrate,resist heavier loads ensure superior dynamic accuracy and a long service life.
High acceleration speed on 3 axes, X-axis 0.8G, Y-axis 0.9G, and Z-axis 1.0G. This outstanding design greatly reduces machining time while upgrading economical efficiency.
3 axes feedrate：rapid feedrate 36m/min
cutting feedrate 12m/min. |
|
 |
| Specification |
VF700 |
| Table Size |
800 × 510 |
| T-Slot |
18MM x 5T × 100 |
| Spindle Nose to Table surface |
150-560 |
| Spindle center to column front surface |
555 |
| Travel |
X |
700mm |
| Y |
510mm |
| Z |
410mm |
| Spindle Taper |
Standard |
BT40 (NBT40/HSKA63/CAT40/DIN40) |
| Rapid Feed on XYZ |
36/36/36(m/min) |
| Cutting Feed Rate |
1-12000mm |
| Spindle Motor |
7.5/11kW(15HP) |
| 3 Axes Motor |
A22i/HF353 (Z Axis break included) |
| Automatic Tool Changer |
Genova Type 16 Tools |
| Max Load Capacity |
500kg |
| Machine Weight |
5500kg |
| Guide Ways |
3 Axes Linear Guide Way |
| Max. tool length |
250mm |
| Max. tool weight |
6kg |
| Motor of tool magazine |
40W |
| X, Y & Z axis servomotors |
4kW/4kW/4kW |
| Air pressure requirement |
5-7 kgf/cm |
| Automatic lubricator(Slideways) |
150W |
| Coolant motor |
0.86kW |
| Total power consumption(Max.) |
41KVA |
45KVA |
41KVA |
| Coolant tank |
250L |
| Dimensions（L×W×H） |
2700×2000×3800 |
| Net weight |
500kg |
| Gross weight |
5500kg |
| CNC control system |
1 FANUC/MITSUBISHI/SIEMENS/HIEDENHAIN/ANILAM |
|
