Vertical Machining Center ( Linear guide ways )

X / Y / Z travel 1,020/510/560 (40.1/20/22 Inch) mm
Spindle nose to table surface 150~710 (5.9~27.9 Inch) mm
Spindle center to column surface 608 (23.9 Inch) mm
Table size 1,200x500 (47.2x19.6 Inch) mm
T slot ( Size / Qty / Dist. ) 18x5x100 mm
Max. table load 500 Kgs
Speed 8,000 rpm
Taper BT40/DIN40/CAT40
Transmission Belt
Feed Rate
Rapid feed rate of XYZ 36/36/36 M / min
Cutting feed rate 1~10 M / min
Automatic Tool Changer
Tool storage capacity Arm type 24 tools
Max. tool diameter Full:100 mm
Next empty:150 mm
Max. tool length 300 mm
Max. tool weight 6 Kgs
CNC Controller & Motor
CNC controller Mitsubishi (*FANUC/SIEMENS/HEIDENHAIN)
Spindle motor 5.5/7.5 kw (10 HP)
Axis motor 2 KW
Coolant pump 0.75 HP
Coolant tank capacity 230 L
Air & Power Supply
Air source 6 Kg / c㎡
Power supply 15 KVA
Machine Dimension
Dimension 2,900x2,420x2,850 mm
Net weight 5,200 kgs

The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine. Specifications are subject to change without notice.

  • BT-40 / CAT40 / DIN40 8000 RPM spindle (Φ150mm). 100% balanced with low vibration performs high precision machining. Air blow function is standard to keep chips from falling into Spindle.
  • Optional spindle speed: 10,000 / 12,000 / 15,000 / 24,000 / 30,000 RPM
  • Hardened & Ground C3 Double-Nut ballscrews (Φ40mm) are pre-tensioned to minimize backlash, provide high precision movement, and reduce heat deformation on all axes.
  • Special design Weight Balance leadscrew with needle bearings for better support and smooth movement.
‹ ‹ Back