HBM-110

Travel
X / Y / Z travel 2,000/1,800/1,700 (78.7/70.8/66.9 Inch) mm
Spindle nose to table surface 550~2,250 (W axis=50~550) mm
W axis travel 500 (19.6 Inch) mm
Table
Table size 1,400x1,600 (55.1x62.9 Inch) mm
T slot ( NO. / W / Dist. ) 7x24x200 mm
Max. table load 8,500 Kgs
Distance of ground to table surface 1,310 (51.5 Inch) mm
Min. B axis index 0.001 degree
Spindle center to table surface 0 ~ 1,800 mm
Spindle
Speed 5~2,500 rpm
Taper ISO NO 50 7/24
Spindle diameter ( W axis ) Ø110 mm
Spindle front bearing NN3032MBKR + 160BAR10SX2 mm
Max. spindle torque output ( full HP/ full torque ) 98 rpm/1,720 N.m
Motor
Spindle motor (kw) 15/18
Spindle motor ( gear box 4 steps ) 30mins / continue α15/7k/18.5/15kw/117.7 N.m Kw / Nm
X axis servo motor / HP / torque
( absolutely / indirect transmission )
α40/3000i/6kw/torque 130 N.m Kw / Nm
Y axis servo motor / HP / torque
( absolutely / direct transmission )
α40/3000i/6kw/torque 130 N.m Kw / Nm
Z axis servo motor / HP / torque
( absolutely / indirect transmission )
α40/3000i/6kw/torque 130 N.m Kw / Nm
W axis servo motor / HP / torque ( absolutely ) α22/3000i/4kw/torque 64 N.m Kw / Nm
B axis servo motor / HP / torque ( absolutely ) α30/3000i/7kw/torque 83 N.m Kw / Nm
Automatic Tool Changer
Tool storage capacity 40 pcs (*60pcs)
Max. tool length 400 mm
Max. tool weight 25 Kgs
Tool change time ( T-T ) 15 sec
Type BT50/CAT50/DIN50
Pull stud MAS P50-1 (45°)
Tool selection mode Absolute Location,Select nearby tool (Two-way)
Max. tool diameter / next tool empty diameter Ø125
Next empty:Ø245
Three axis D.R.O. Heidenhain
Y axis balance equipment Hydraulic Counter Weight System
Feed
3-axes rapid feed ( X / Y / Z ) 12 m/min
Cutting feed 5 m/min
Rapid feed rate of W 5 m/min
Min. setting unit 0.001 mm/min
CNC Controller & Motor
CNC controller 0Mi/32i-B
Tank Capacity
Oil Tank Capacity ( Hydraulic System ) 120 L
Coolant & Lubrication
Center automatic lubrication oil tank capacity 6 L
Coolant
Coolant tank capacity 400 L
Air & Power Supply
Power supply 50 KVA
Guide Way
X axis linear guide way Roller type linear guide RGW65HC-2 rails
Y axis box way Box way-2 rails
Z axis linear guide way Roller type linear guide RGW65HC-2 rails
W axis linear guide way RGH25CA-2 rails
Machine Dimension
Net weight 30,000
Machine dimensions ( L x W x H ) 6,220x5,100x4,120 mm
Ball Screw
X axis ballscrew ( diameterx pitchx precision ) Ø63 mmxP10xC3
Y axis ballscrew ( diameterx pitchx precision ) Ø63 mmxP10xC4
Z axis ballscrew ( diameterx pitchx precision ) Ø63 mmxP10xC5
W axis ballscrew ( diameterx pitchx precision ) Ø40 mmxP10xC6
XYZ axis ballscrew support bearing 50TAC100B DBB
W axis ballscrew support bearing 30TAC62B DBB

The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine. Specifications are subject to change without notice.

  • #50, 2500rpm gear-drive spindle is designed specifically ideal for precision boring jobs.
  • The moving column design together with spindle extension (W-axis) reduces the possibility of interference between the machine and the workpiece.
  • X, Z-axis Linear ways, Y-axis Box ways, the combination of linear ways and box ways enhances efficiency and cutting stability simultaneously.
  • Three axes feeds are transmitted through large diameter ball screws in combination with motor speed reduction ratio of 1:2, providing powerful transmission effect.
  • The table area measures 1400 x 1600mm and provides a maximum loading capacity of up to 8,500kg. 1/1000-degree of table indexing allows for continuous rotation for increasing working efficiency.
‹ ‹ Back