HBM-110

Travel
X / Y / Z travel 2,000/1,800/1,700 (78.7/70.8/66.9 Inch) mm
Spindle nose to table surface 550~2,250 (W axis=50~550) mm
W axis travel 500 (19.6 Inch) mm
Table
Table size 1,400x1,600 (55.1x62.9 Inch) mm
T slot ( NO. / W / Dist. ) 7x24x200 mm
Max. table load 8,500 Kgs
Distance of ground to table surface 1,310 (51.5 Inch) mm
Min. B axis index 0.001 degree
Spindle center to table surface 0 ~ 1,800 mm
Spindle
Speed 5~2,500 rpm
Taper ISO NO 50 7/24
Spindle diameter ( W axis ) Ø110 mm
Spindle front bearing NN3032MBKR + 160BAR10SX2 mm
Max. spindle torque output ( full HP/ full torque ) 98 rpm/1,720 N.m
Motor
Spindle motor (kw) 15/18
Spindle motor ( gear box 4 steps ) 30mins / continue α15/7k/18.5/15kw/117.7 N.m Kw / Nm
X axis servo motor / HP / torque
( absolutely / indirect transmission )
α40/3000i/6kw/torque 130 N.m Kw / Nm
Y axis servo motor / HP / torque
( absolutely / direct transmission )
α40/3000i/6kw/torque 130 N.m Kw / Nm
Z axis servo motor / HP / torque
( absolutely / indirect transmission )
α40/3000i/6kw/torque 130 N.m Kw / Nm
W axis servo motor / HP / torque ( absolutely ) α22/3000i/4kw/torque 64 N.m Kw / Nm
B axis servo motor / HP / torque ( absolutely ) α30/3000i/7kw/torque 83 N.m Kw / Nm
Feed
3-axes rapid feed ( X / Y / Z ) 12 m/min
Cutting feed 5 m/min
Rapid feed rate of W 5 m/min
Min. setting unit 0.001 mm/min
Automatic Tool Changer
Tool storage capacity 40 pcs (*60pcs)
Max. tool length 400 mm
Max. tool weight 25 Kgs
Tool change time ( T-T ) 15 sec
Type BT50/CAT50/DIN50
Pull stud MAS P50-1 (45°)
Tool selection mode Absolute Location,Select nearby tool (Two-way)
Max. tool diameter / next tool empty diameter Ø125
Next empty:Ø245
Three axis D.R.O. Heidenhain
Y axis balance equipment Hydraulic Counter Weight System
CNC Controller & Motor
CNC controller 0Mi/32i-B
Coolant & Lubrication
Center automatic lubrication oil tank capacity 6 L
Tank Capacity
Oil Tank Capacity ( Hydraulic System ) 120 L
Coolant
Coolant tank capacity 400 L
Air & Power Supply
Power supply 50 KVA
Guide Way
X axis linear guide way Roller type linear guide RGW65HC-2 rails
Y axis box way Box way-2 rails
Z axis linear guide way Roller type linear guide RGW65HC-2 rails
W axis linear guide way RGH25CA-2 rails
Ball Screw
X axis ballscrew ( diameterx pitchx precision ) Ø63 mmxP10xC3
Y axis ballscrew ( diameterx pitchx precision ) Ø63 mmxP10xC4
Z axis ballscrew ( diameterx pitchx precision ) Ø63 mmxP10xC5
W axis ballscrew ( diameterx pitchx precision ) Ø40 mmxP10xC6
XYZ axis ballscrew support bearing 50TAC100B DBB
W axis ballscrew support bearing 30TAC62B DBB
Machine Dimension
Net weight 30,000
Machine dimensions ( L x W x H ) 6,220x5,100x4,120 mm

The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine. Specifications are subject to change without notice.

  • #50, 2500rpm gear-drive spindle is designed specifically ideal for precision boring jobs.
  • The moving column design together with spindle extension (W-axis) reduces the possibility of interference between the machine and the workpiece.
  • X, Z-axis Linear ways, Y-axis Box ways, the combination of linear ways and box ways enhances efficiency and cutting stability simultaneously.
  • Three axes feeds are transmitted through large diameter ball screws in combination with motor speed reduction ratio of 1:2, providing powerful transmission effect.
  • The table area measures 1400 x 1600mm and provides a maximum loading capacity of up to 8,500kg. 1/1000-degree of table indexing allows for continuous rotation for increasing working efficiency.
‹ ‹ Back