 |
| 型號 |
| DL-3016 |
| 機台 |
High Speed, High Accuracy
Double Column Machining Center |
|
|
 |
| Triple-Guide Y-axis |
- The Y-Axis is supported by 3 oversized roller type guide ways to reinforce cutting rigidity in both axial and radial directions. Two roller guides are assembled on the face of the bridge while the 3rd sits on top of the bridge to enhance the holding force on the headstock.
|
| Super Body Structure |
- Reinforced Body Structure through FEM analysis and Triple-guide Y-axis Design, the DL Series offers superb cutting rigidity and reduced vibration ideal for metal removal efficiency and extended tool life.
|
| Roller Bearings Linear Motion Guides |
- Low friction for motion smoothness
- Great dynamic and stability load-bearing capacity
- Superior geometric accuracy and surface quality
- Better vibration behavior to extend tool life
|
| Z-Axis Hardened & Ground Boxway |
- The DL Series utilizes Hardened and Ground Boxed ways for Z-Axis. The female type boxed ways allows the weight of ram to be uniformly distributed through dual gibs design.
- This provides better cutting rigidity and smoother ram movement during 3-D contouring operations.
|
 |
| Model |
DL2016 |
DL3016 |
DL4016 |
| X/Y/Z Travel (mm) |
2050/1600/765(1050) |
3050/1600/765(1050) |
4050/1600/765(1050) |
| Table Size (mm) |
2350x1500 |
3250x1500 |
4250x1500 |
| T-Slot (mm) |
9-22x150 |
| Dist. Between Columns (mm) |
1800 |
| Spindle Motor (HP/kW) |
15HP/18.5kW(20HP/25kW) |
| Spindle RPM |
BT50 Direct Drive 6000RPM with Gear Box
(Opt. BT40 Direct Drive 15000RPM / BT50 Belt type 6000RPM / BT40 belt type 15000RPM ) |
| Gear Box Direct Drive from 1500 ~ 6000RPM |
| Spindle Taper |
BT#50 / BT#40 (Opt.) |
| Spindle Nose to Table surface (mm) |
150~900 |
| 3 Axes Motor (kW) |
4.5kW on X & Y / 6kW on Z Axis (Break included ) |
| Rapid Feed Rate (m/min) |
12(X)/20(Y)/20(Z) |
| 3 Axes Guide Way |
X、Y Axes Roller Linear Guide Way / Z Axis Box Way |
| Cutting Feed Rate (m/min) |
10M/10M/10M |
| Tool Capacity |
40Tools ( Opt. 60T / 80T ) |
| Table Max Load Capacity (Ton) |
10 Ton |
15 Ton |
20 Ton |
| Positioning |
0.005/300mm |
| Repeatability |
P0.03mm |
P0.03mm |
P0.03mm |
| Machine Weight |
30 Ton |
| Dimensions |
6850X4700X4400 |
|
