Home
繁體中文
 
CNC Mini Mill
CNC LATHE
．ML-200 / MH-200

Products >Knee Type Milling > Knee Type Mills > 6KS / 6KV

Model Number
6KS-SP
6KS-FP
Machine
Vertical Turret Milling Machine
6KS-FP(X axis table feed by inverter motot)
6KS-SP(X axis table feed by servo motor)
(5HP, 10 speeds step head)NST#40
Model Number

6KV-SP
6KV-FP
Machine
Vertical Turret Milling Machine
6KV-FP(X axis table feed by inverter motot)
6KV-SP(X axis table feed by servo motor)
(5HP, Variable speeds head)NST#40
 

    Features
    6KS
    6KV
    Spindle motor
    5HP
    5HP
    Spindle material made from SCM415 (SAE4115) Cr-Mo alloy steel with tempering treatment, fully hardened & ground, spindle run out : 0.005mm
    ○
    ○
    Quill dia. 105mm
    ○
    ○
    Centralized one shot lubrication for way, nuts, and leadscrews
    ○
    ○
    Precision angular contact spindle bearing, p4 7210 for high accuracy and heavy duty cutting
    ○
    ○
    10 speed step-pulley drive
    ○
    -
    Infinitely variable speed drive up to 4300rpm / 60Hz 3600rpm / 50Hz
    -
    ○
    Unique design hi-low gear speed change, bearings support on both side of spindle pulley
    ○
    -
    Adjustable brake handle for increased brake shoe life
    ○
    -
    Patented special copper alloy SAM214 for vari-Disc keys, Precision ground with grease lubrication groove designed to prevent overheating
    -
    ○
    Bearing support to the end of motor shaft
    -
    ○
    Double sided Vari-Disc belt to give lower noise level
    -
    ○
    Motor shaft material made from SCM425 Cr-Mo alloy steel, dia. 28mm
    -
    ○
    Precise ball screws on X & Y
    ○
    ○
    Lifting screw dia. 38mm
    ○
    ○
    Extra long saddle (1016mm) support to the table provides high accuracy & rigid machining
    ○
    ○
    Turcite-B coated on XY ways
    ○
    ○
    Square way designed on Y & column slideway
    ○
    ○
    Lifting motor for knee up-down, electric box & panel
    ☆
    ☆
    ○ Standard - Not available ☆Optional


SPECIFICATION
MF-2TM
4KS
MF-450TM
5KS
6KS-FP
6KS-SP
MF-1-1/2VS
4KV
MF-450VS
5KV
6KV-FP
6KV-SP
Table size
230 x 1067 mm (9" x 42")
254 x 1270 mm (10" x 50")
305 x 1270 mm
(12" x 50")
T slots of table
(Q'ty x size)
3 x 16mm (3 x 0.629)
Longitudinal travel (X axis) Manual
762 mm (30")
890 mm (35")
776 mm (30.55")
776 mm (30.55")
850 mm (33.464")
Auto
682 mm (26.85")
810 mm (31.9")
696 mm (27.4")
696 mm (27.4")
850 mm (33.464")
Cross travel
305 mm (12.007")
406 mm (15.984")
410 mm (16.141")
390mm (15.354")
Vertical travel of knee (Z axis)
406 mm (15.984")
450 mm (17.716")
400 mm (15.748")
Ram travel
390 mm (15.354")
560 mm (10.236")
510 mm (20")
Quill travel
127 mm (5")
Spindle to table nose (D)
34~440 mm (1.388"~17.322")
100~506 mm (4"~20")
85 ~ 535 mm (3.3"~21")
85~485 mm
(3.3"~19"）
Over swivel on turret
360°
Head swivel (R & L)
+- 45°
Head tilt (up & down)
+- 45°
Option
Spindle to column (E)
154~544 mm(6"~21.4")
159~719 mm
(6.25" ~ 28.3")
178~738
(7"~29")
140~650 mm (5.5"~25.6")
Spindle motor
3 HP
3HP(Step)/5HP(Variable)
5HP(Step)/5HP(Variable)
X axis motor
Option: Power Feed (electric or gear type)
1/2hp Inverter motor
Lifting motor
None
1/2 HP (Option)
1HP gear type motor
Spindle taper
NST # 30 (or R8 & NST # 40)
NST # 40
Quill Feeds (mm/rpm)
0.04mm~0.08mm~0.14mm (0.0015"-0.003"-0.006")
X axis rapid speed (mm/min)
Nil
2000
3750
Lifting speed
Nil
Option
430 mm/rpm
Spindle speed (rpm) Step head
50Hz Low:66~270 Hi:550~2270 60Hz Low:80~325 Hi:660~2720
50Hz Low:54~330 Hi:475~2875 60Hz
Low:65~400 Hi:570~3450
Variable Speed head
50Hz Low:50~420 Hi:420~3900 60Hz Low:60~500 Hi:500~4500
50Hz Low:40~415 Hi:415~3600 60Hz
Low:60~500 Hi:500~4300
Overall height (A)
2105 mm (82.874")
2120 mm (83.464")
2120 mm (83.614")
2360 mm (92.913)
2380 mm (93.7")
Overall depth (B)
1618 mm (63.7")
1984 mm (78.11")
2073 mm (81.614")
2120 mm (83.614")
2120 mm (83.614")
Overall width (D)
1497 mm (58.937")
1666 mm (65.59")
1680 mm (66.141")
1790 mm (70.472")
1790 mm (70.742")
Net weight
950 kg
(2200 lbs)
1200 kg (2625 lbs)
1250 kg (2730 lbs)
1600 kg (3500 lbs)
1800 kg (3938 lbs)

Standard Accessories For Standard Accessories For
Draw bar / tools box / Rubber chip cover all machines Inverter motor for X axis Power feed 6KS-FP (6KV-FP) / 6KS-SP (6KV-SP)
Lifting motor & electric box 6K Ball screws on X & Y axes / Coolant / Automatic lubrication 6KS-FP (6KV-FP) / 6KS-SP (6KV-SP)

Optional Accessories
Table power feed
(electric or gear box type) 		Electric box for 2TM / 3KS / 4K / 450TM / 5K Clamping kit
Coolant system Lifting motor for MF-450/5K Milling Chuck (NST#30 /R8/NST#40)
Base splash guard Ball screws on X & Y axes. Milling vise (Angle-lock / Hydraulic)
Quartz work light Long table 49" or 54" Horizontal milling attachment
Automatic lubrication Riser block 4" or 8" D.R.O. System.
2/4P 16 speeds Motor (except 5K & 6K) NST#40 spindle (2TM / 1-1 / 2VS / 4KS / 450TM / 450VS) Power Draw bar (Air or Electric).


Manford Machinery Co., Ltd.
Address: No. 18 Hsin Jen Rd. Sec. 1 Taiping city, Taichung Hsien, TAIWAN, R.O.C.
Telephone: 886-4-22758120 / Direct Line : 886-4-22754899
Fax: 886-4-22758737
E-mail: belle@manford.com.tw